Floors

To reduce condensation due to high humidity, it is recommended than insulation is installed under concrete floors. If your cooler will be installed on a wood surface, a cooler floor is necessary to avoid condensation that will rot out the wood floor. Insulation is required on a concrete floor for a freezer. Your local codes should be researched. When a ramp is in use, doors and floors must be re-enforced.

Installation

All Dade Engineering products are tested at our plant for accuracy by pre-assembly before shipping. A manual is attached to every cooler and every panel is labeled. Cam lock devices are locked together for easy assembly and once panels are locked together, they provide an air tight seal.

Floor Construction

22 ga Smooth Mill Floor Plate, 4” Extruded Polystyrene Foam (EISA 2007 Approved), NSF gasket with Cam-Locks hardware and Built in ramp.

Warranties

Panel construction warranty is 10 years and does not include labor. Hardware warranty is a one year by manufacturer. Foam manufacturer’s warranty is 50 years.

NSF Certified

Packaging

A four way pallet is the base for all panels. Foam is installed between panels and plastic wrapped. Cardboard is added to all corners.

Optional Accessories

  • Cold Storage Lighting

  • Flourescent 4" fixtures with bulbs

  • Strip Courtains

  • Windows

  • Glass Convenient store doors

  • Temperature monitor alarm systems

  • Shelving packages

Replacement Door & Parts

  • Hinges

  • Gaskets

  • Door hardware

  • Handles

  • Latches

  • Sliding door parts

  • Shelving packages

door1-img.jpg
door2-img.jpg
door3-img.jpg

Quickship Standard Sizes

 
 
QUICKSHIP STANDARD SIZES
 
 
 

Outdoor Walk in Coolers And Freezers

A membrane rain proof roof is installed on outside coolers with flashing, anchoring hardware and a door rain cap.